If no jumper cap is placed on the pins, the jumper is “OPEN”. The setting of the CPU front side bus frequency of this motherboard is by means of the adjustment of jumper-setting. If the 4 USB 2. Whenever you uninstali any component, place it on a grounded antistatic pad or in the bag that comes with the component. Hold components by the edges and do not touch the ICs 4. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. The CPU fits only in one correct orientation.
|Date Added:||21 April 2018|
|File Size:||52.1 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
DO NOT place jumper caps over these connectors. The setting of the CPU front side bus frequency of this motherboard is by means of the adjustment of jumper-setting.
ASROCK K7VM2 Installation guide |
Match the red marking on the floppy ribbon cable with Pin1. Unlock a DIMM slot by pressing the retaining clips outward.
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. Power Management for USB chipsett.
Remove the bracket facing the slot that you intend to use.
If both jumper caps on JL1 and JR1 are removed see fig. Keep the screws for later use. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will he subject to change without notice In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.
Download ASRock K7VM2 VIA 4 in 1 Driver
For detailed information, please asrocj to page 13 of user Manual in the Support CD. The lever clicks on the side tab to indicate that it is locked.
Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due asrkck static electricity, NEVER place your motherboard directly on the carpet or the like. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and asroxk likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.
If the 4 USB 2.
Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
If no jumper cap is placed on the pins, the jumper is “OPEN”. Hold components by the edges and do not touch the ICs 4. Please follow the figures above to set the CPU front side bus frequency. While CPU overheat is detected, the system will automatically shutdown.
ASRock K7VM2, Socket A, AMD Motherboard
chiipset With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
There are 2 ways for you to clear and reset the system parameters to the default setup.
It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. It’s a community-based project which helps to repair anything. Please remember to remove the paper clip or the jumper cap after clearing the CMOS.
Micro ATX form factor 9. The AGP slot is used to install a graphics card. Supports 2 floppy disk drives Audio: Please turn off the computer and unplug the power cord, then you may either short the solder points on CLRCMOS1 by using metal material, e.
Whenever you uninstali any component, place it on a grounded antistatic pad or in the bag that comes with the component. When you connect speakers in back panel and front panel at the same time, 1.
The CPU fits only in one correct orientation. Please check if the CPU fan on the motherboard functions properly before you resume the system.